관련링크
IR3 Flame Detector | RFD-3FT
RFD-3FT is a Triple IR (IR3) Flame Detector.
Identify fire by analyzing the IR wavelengths of a flame.
Maximum 50 meters of detection range with a 90 degree cone of vision.
Permits operation at Hazardous areas.
User selectable output options among Relays, 4-20㎃ stepped output, and RS-485.
• Multispectrum IR sensors
• Enhanced False Alarm Immunity against sunlight and artificial false alarm sources
• Explosion-Proof and Dust Ignition proof
• Suitable for hazardous areas such as Oil, Gas stations and Petrochemical plants
[ Specification ] • Type : Triple Infrared, Outdoor, Non explosion-proof, Particulate • Nominal sensing range : 50m • Sensing angle : 90°, Cone type • Explosion-proof class : T6,IP67,IIC(Korea Gas Safety Corporation) • Operating temp. :-40 ~ +75°C • Keeping temp. : -50 ~ +90°C • Humidity : 0~95% • Output signal - RELAY - Fire : 5A(250VAC, 30VDC), A connect point - O.C (Open Collector) Fire : MAX DC 32V, 10mA Error : MAX DC 32V, 10mA - 4~20mA - RS485 • Function - Diagnostic sensor fault enable - Self test - Remote self diagnostic ON/OFF control ( BIT ) | [ Structure ] • Material : Aluminum 6061 • Surface : Anodizing Process • Color : Red • Weight : About 0.53㎏ • External : 64 × 64 × 75mm, Hexahedral, Connector 1/2 inch PF [ Electrical ] • Power Cunsumption : 3.9W • Voltage : DC 24V,(17~30V, pulsating current enable) • Current - Idel(Sensing) : 100mA - Fire(Activating, Emergency)(Sensing) : 120mA - Self test : 170mA |
|
RSC-02 |
RF-A-02 |
BK-01 |
