관련링크
UVIR Flame Detector | RFD-2FT5-I
RFD-2FT5-I is a UV/IR type flame detector.
Identify fire when both UV and IR sensors simultaneously detect the presence of a flame.
Maximum 50 meters of detection range with a 90 degree cone of vision.
Permits operation at Hazardous areas.
User selectable output options among Relays, 4-20㎃ stepped output, and RS-485.
• UV/IR Dual-sensors
• Enhanced False Alarm Immunity against sunlight and artificial false alarm sources
• Explosion-Proof and Dust Ignition proof
• Suitable for hazardous areas such as Oil, Gas stations and Petrochemical plants
[ Specification ] • Type : Ultraviolet and Infrared, Indoor, Explosion-proof, Particulate • Nominal sensing range : 50m • Sensing angle : 90°, Cone type • Operating temp. : -40 ~ +75°C • Humidity : 0~95% • Explosion class : Exd IIC, T6,IP67(KGS,ATEX) • Output signal - Relay Fire : 1A ( 250VAC, 30VDC ), A connect point Error : 1A ( 250VAC, 30VDC ), A-B connect point - 4~20mA - RS485 • Function - Diagnostic sensor fault enable - Self test - Remote self diagnostic ON/OFF control ( BIT ) | [ Structure ] • Material : Aluminum 6061 • Surface : Anodizing Process • Color : Blue • Weight : About 0.53kg • External : 64 × 64 × 75mm, Hexahedral, Connector 1/2 inch PF [ Electrical ] • Power Consumption : 5.8W • Voltage : DC 24V, ( 17~30V, pulsating current available) • Current - Idle(Sensing) :60mA - Fire(Activating, Emergency)(Sensing) : 80mA - Self test : 120mA cable recommended. • Electromagnetic Compatibility : EMC Protected |